7-17
IM 04P02B01-01E
Setup Operations for Changing/Adding Functions (Basic Setting Mode)
7
Set the password for releasing the key
lock.
Select whether to use the key lock
function.
Select Lock to apply the key lock function
to the RCD key.
Select Lock to apply the key lock function
to the FEED key.
Select Lock to apply the key lock function
to the MENU key.
Select Lock to apply the key lock function
to the DISP MENU.
Select Lock to apply the key lock function
to the alarm ACK operation.
Select Lock to apply the key lock function
to the computation start/stop operation.
Select Lock to apply the key lock function
to the various printout operations.
Select Lock to apply the key lock function
to the message printout operation.
Select Lock to apply the key lock function
to the operation of clearing the printout
buffer.
The new setting takes effect.
Select Lock to apply the key lock function
to the operation of resetting the report
data in periodic printout.
Select Lock to apply the key lock function
to the operation of moving the carriage
assembly to a position where the pen can
be easily replaced.
Select Lock to apply the key lock function
to the operation of moving the pen to a
position where the pen can be easily
replaced.
Basic=Key Lock
ESC/?
Keylock
Setting complete
Keylock=Use
Password=
RCD=Free
Feed=Free
Menu=Free
Disp Menu=Free
Alarm ACK=Free
Math=Free
Printout=Free
Message=Free
Buffer clear=Free
Periodic=Free
Pen exchange=Free
Ribbon exchange=Free
(Pen model)
(Dot model)
7.10 Setting the Key Lock Function
