5-5
<Wiring>
IM 01W06F02-01EN
n
Wiring to the input terminals
strip the insulated cover and twist and connect it. Strip the insulated cover
for 8 mm. Never solder the stranded conductor when connecting cables. Be
careful not to cause the loosely stranded conductor to come in contact with
adjacent terminals or others. Insert the cable leads into the terminal block
securely.
F14.ai
Cable
Core
Length of exposed wire
Figure 5-5 Length of Exposed Wire
n
Replacement with different type of temperature sensor
When replacement to different type of temperature sensor, it is necessary to
change the parameters related to the sensor type. For setting method, refer to
"Sushi Sensor Series Software Edition" (IM01W06C01-01EN).
XS550 supports the following sensor types.
Thermocouples: B, E, J, K, N, R, S, T, C
Check the connection between the input terminal and thermocouple, and set
the correct sensor type and number of connections.
