3. Configuration
25
TI 01W01A56-01EN
3.4
Access Point Initial Configuration
Access Point initial configuration is the procedure to set Device Tag and Password to
Access Point using IR adapter.
If the Device Tag is set at factory, please skip this configuration.
1. Double-click the YFGW510Tool.exe.
Select serial communication port for IR adapter.
• Default Login Password is “
yokogawa
”.
• The IR adapter needs to be held in position until the communication has finished.
If there is a tag
name, YFGW510 is
initialized
Field wireless access point setup tool
Infrared adapter
Less than 30 cm
YFGW510
2. Change login password from factory default.
• User must change password on his first time login.
• Up to 8 single byte alphanumeric characters, A-Z, 0-9, or special characters (e.g.,!,$,#)
3. Open [Maintenance] Tab and select [Edit mode].
• It restarts the tool automatically and login again with new password.
Mar. 31, 2014-00
