2. Preparation
9
TI 01W01A56-01EN
2.2
Installing Software and CF/DD File
Table.5 shows the software that is required for each purpose (Installation, Operation and Mainte-
nance).
Install these required software tools, CF/DD File, and the infrared adapter driver on Configuration
& Monitoring PC.
For the installation procedure, refer to the instruction manual of the respective software.
Table. 5 PC and Software
No.
Software
Usage
Required steps
Instal-
lation
Opera-
tion
Mainte-
nance
1
Field Wireless
Management
Console
Wireless Network
Configuration &
Monitoring
Web based software without
Installation
ü
(
ü
)
ü
2
FieldMate Basic
Advance and
Device Files
Device Provisioning
Sensor configura-
tion
Install the software from Field-
Mate DVD (Need to purchase)
ü
-
ü
3
Infrared adapter
driver:
Device Provisioning
Install the driver from Infrared
adapter accessary DVD.
(ACTiSYS Infrared Adapter
[ACT-IR224UN 9600bps])
ü
-
ü
4
YFGW510tool
Initial setting
for Access Point
Copy the software from
YFGW510 accessary DVD
to the recommended folder
below.
<C:/Yokogawa/FieldWireless/
YFGW510tool>
ü
-
-
5
CF/DD File
Field Wireless
Device Registration
(CF files contain
the vendor names,
model names, revi-
sions etc.)
(1) Confirm the appropriate
revision on the website. [*1]
<http://www.field-wireless.
com/en/download/index.html>
->“Support for Field Wireless
Devices and FieldMate /PRM”
(2) Save the CF/DD files to the
recommended folder below.
<C:/Yokogawa/FieldWireless/
CFDD/59543/**** [*2]>.
ü
ü
ü
[*1] The second bit positioned character on a Main name plate [SUFFIX column] of Field Wireless Device indicates
“Amplifier housing basic specification code”.
[*2] “0005” for Temperature Transmitter YTA510,
“000c” for Pressure Transmitter EJX series,
“1802” for Multi-Input Temperature Transmitter YTMX580.
Mar. 31, 2014-00