24
BLINDHEM STITCH
The blindhem stitch is primarily used for hemming curtains
, trousers
, skirts,etc.
SETTINGS
Presser foot : General Purpose Foot
Thread tension control: (4)
- Regular blind stitch for normal woven fabrics
- Elastic blind stitch for soft, stretchable fabrics
Now fold the fabric as illustrated with the wrong side up.
2.
With matching thread finish the raw edge. On fine fabric, turn up and press
a small 1/2" or less hem.On medium to heavyweight fabrics overcast the
fabric's raw edge.
1.
Place the fabric under the foot. Turn the handwheel counter clockwise by
hand until the needle swings fully to the left. It should just pierce the fold of
the fabric. If it does not, adjust the guide (B) on the Blindhem Foot (A) so
that the needle just pierces the fabric fold and the guide just rests against
the fold.
3.
NOTE: In addition to the adjustment on the foot,the stitch width control
can be used. The stitch width control changes the swing of the needle for
a more narrow or wider stitch.
Sew slowly, guiding the fabric carefully along the edge of the guide.
When completed, the stitching is almost invisible on the right side of the
fabric.
4.
NOTE: It takes practice to sew blind hems. Always make a sewing test
first.
Summary of Contents for KP6210
