4
not work normally.
6. Custom setting
In order to meet the users needs, there are currently three versions of custom settings available:
Table 6-1 Functions of each Custom Setting Version
Version
Setting function
Remarks
A1
N/A
/
A2
6.1 Metric/imperial system s 6.2 Setting of number of
steel magnets for speed measurement
Settings 1
A3
6.3 Rated voltage s 6.4 Wheel diameter s 6.5
Speed limit setting
Settings 2
The steps for custom setting are as follows:
In the power-on state, when the display shows the speed of 0,
(1) Simultaneously press and hold buttons
and
for more than 2 seconds, the custom setting interface will pop
up;
(2) Press the button
to switch the function, and press the button
to enter the parameter modification
interface;
(3) Press the button
for parameter selection;
(4) Press and hold the button
to confirm and save the parameter. When "---" is displayed, it will automatically
return to the custom setting interface. Alternatively, press the button
to return to the custom setting interface without
saving the parameter;
(5) Press and hold the button
or
to exit the custom setting interface.
If no operations are performed within one minute, the display will automatically exit the setting interface.
All parameters can only be set when your e-bike stops.
A2 version custom setting:
6.1 Metric/imperial system setting
P1 refers to the metric/imperial system setting option. 00 represents the metric system (unit: "km/h"), and 01 represents
the imperial system (no unit display). In the parameter modification interface, press the button
to select a parameter,
and press and hold the button
to confirm and save the parameter. When "---" is displayed, it will automatically return
to the custom setting interface.
Fig. 6-1 Metric/imperial System Switching Interface
