C-2. Add Device
Ta p “ ” b u o n , t h e n s c a n Q R C o d e
o n t h e d e v i c e . F o l l o w t h e s t e p s t o a d d
t h e d e v i c e
1
1. You will need to press the SET bu on once again if the device failed to connect to the cloud
2. Pressing the SET bu on at any other me a er this ini al process will result in the Alarm LED
blinking red, only. This indicates the device is connected to the cloud and is func oning normally
3. If the red LED does NOT blink as noted this may indicate a problem with the device Please see the
troubleshoo ng sec on and the contact sec on for technical support
5
SN: 7103123456
Set the Power/Sound Level Switch
to High (H) or Medium (M) or Low
(L) level, the LED indicator will
blink several
mes (red, then
green).
3
Power/Sound
Level Switch
OFF
L
M
H
Power the device
using the provided
power adapter
2
Power
Adapter
SET
