The Other YN-622C User Guide
28/08/2013
Page 23 of 23
SPECIFICATIONS
Standard Pack
•
2 x Transceivers, auto-switching between transmitter/controller and receiver/slave
•
Quick Start Guide
•
User Manual
•
Some resellers may offer single or multiple units.
Transceiver Dimensions
•
90 x 53 x 25mm (39mm incl. hot-foot).
•
79gm without batteries
Electrical
•
Batteries: each unit requires 2x AA batteries (1.5v Alkaline or 1.2v NiMH)
•
Standby time: 60 hours.
•
6 volts maximum safe trigger voltage on hot-shoe centre pin
•
300 volts maximum safe trigger voltage on PC-sync port
•
Digital FSK 2.4GHz radio transceiver. Range 100m (300ft), 7 channels.
Connectors
•
Canon Hot Foot with locking ring and pin, for connecting to camera as transmitter
•
Canon Hot Shoe for mounting hot-shoe flash, including on transmitter
•
PC-Sync screwlock socket, sync out only (1st, 2nd, Supersync)
Controls
•
Power switch Off/On
•
CH Set Button 7 channels C1, C2, C3, 4 (C1+C2), 5 (C1+C3), 6 (C2+C3), 7 (C1+C2+C3)
•
GP Set Button group (single) A, B, C, (combined) AB, AC, BC, ABC on Transmitter; Group
(single) A, B or C on Receiver
•
Test Button - press to awaken flash; release to fire test flash. GP changes group being
tested. (Includes testing via PC port.)
Indicators
•
Status LED: Red – standby; Green operating; send/receive data.
•
3x Channel LEDs: communicating, indicating channel
•
3x Group LEDs: communicating, indicating group
Other fittings
•
Red AF-Assist beam, enabled only on Transmitter. Strong cross-hatched pattern.
•
Battery cover
•
Eyelet for attaching a safety lanyard
Provide-your-own extras
•
Batteries, safety lanyard, PC-sync cord, mini-stand, light-stand cold-shoe
This document is copyright C D Bolton 2012 - 2013 and all moral rights are asserted. It may be shared and
quoted freely, but not altered. Many thanks to those who provided information incorporated in it. All
registered trademarks in this user guide are the property of their respective owners. Specifications and
functions may change without notice.
