WE RECOMMEND YOU HAVE SOMEONE TO ASSIST YOU IN LIFTING AND
ASSEMBLING YOUR YORK PACER 351
M
TREADMILL.
FOLLOW THESE INSTRUCTIONS CAREFULLY AND IT WILL MAKE IT EASIER
FOR YOU TO ASSEMBLE YOUR YORK PACER 351
M
TREADMILL.
GENERAL
ASSEMBLY INSTRUCTION
1.
2.
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
*
*
YORK PACER 351M TM / 03
MAIN
FRAME
BASE
CARTON
1.
2.
Rest the left handle bar post, with the locking
device fitted, beside the main frame and close to
the handle bar mounting tube carefully as shown.
Connect the sensor wire socket to the middle wire
plug protruding at the base of the left handle bar
post.
NOTE: TAKE CARE to ensure the wires are
connected as tightly as possible.
NOTE: TAKE CARE
3.
HANDLE BAR
POST
MOUNTING TUBE
TAKE CARE
- DO NOT TRAP CABLE.
- DO NOT FULLY
TIGHTEN BOLTS YET.
LEFT FRONT
HANDLE
BAR POST
Insert the left front handle bar post into the
handle
post mounting tube and secure,
using four allen head bolts and star washers.
bar
Do not fully tighten the bolts until the
handle bar post, front handle bar and
computer console have all been secured.
NOTE: TAKE CARE to ensure the wire does
not get trapped when you attach the left
handle bar post.
Ask someone to help you remove all the parts
and packaging materials on the top of your
PACER 351
M
from the carton and place them
on the floor carefully.
Fold the main frame up gently and stand it in the
base carton as shown.
Ask someone to help you hold the treadmill on
each side and lift it out from the base carton
carefully.
SENSOR
WIRE
SOCKET
MIDDLE
WIRE
PLUG
LEFT
HANDLE BAR
POST
X4
8560-67
8560-05
