4.
Insert the handle bar into the handle bar post
as shown.
NOTE: The end of the handle bar, with the
shortest foam grip, must be inserted
into the hole on the right handle bar
post first.
7.
Secure the handle bar to the left handle bar
post by using, one long allen head bolt and
star washer.
INSERT THIS
SIDE FIRST
RIGHT HANDLE BAR POST
LONG BOLT
X1
6.
HANDLE BAR
SHORTEST FOAM GRIP END
Hold the rear handle bar post and align the hole
on the bracket to the base and secure, using
one allen head bolt and star washer.
X6
8560-67
8560-05
8560-75
8560-05
X1
Secure the handle bar to the right
handle bar post by using, one short allen
head bolt and star washer.
NOTE: Do not tighten all of the bolts until the
computer console has been secured.
8560-67
8560-05
5.
SHORT BOLT
LOCK
DEVICE
Insert the right front handle bar post into the
handle bar post mounting tube and secure,
using four allen head bolts and star washers.
Hold the rear handle bar post and align the hole
on the bracket to the base and secure, using
one allen head bolt and star washer.
REAR
HANDLE
BAR
POST
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
*
*
YORK PACER 351M TM / 04
Release the lock handle fitted on the left handle
bar post with your left hand and fold down the
main frame to the floor gently with your right
hand.
NOTE: DO NOT FULLY TIGHTEN THE BOLTS UNTIL YOU HAVE COMPLETED THE ASSEMBLY .
NOTE:
