York Fitness 51113, Owner'S Manual

www.yorkfitness.com

8

Fold up

Simply pull the release knob with your right hand and lift the 
running deck to fold (with your left hand). Make sure you hear the 
sound of the deck locking into position - this ensures the deck is 
locked in place and will not fall back down.

Fold down

1.  Whlist taking the weight of the deck with your left hand, pull 

the knob with your right hand.

2.  Still holding onto the deck, guided it slowly down to the floor.
NOTE: Make sure nothing is obstructing the deck as you lower it.

Moving the treadmill

This treadmill features 2 non marking wheels to help 
manoeuvrability:
1.  Folding-up the deck as explained above.
2.  Stand in front of the treadmill, square on.
3.  Put one hand on each of the handrails and tilt the teadmill 

towards you.

4.  Use the handrails to push the treadmill to desired location.
NOTE: Before moving the treadmill, ensure the power cable is 
unplugged from the wall and the treadmill.

Operational instructions

Wheels

Final Check

Your treadmill is now assembled. Please make the 
following final checks:
•  Make sure all screws / bolts are tightened.
•  Make sure the equipment is on a flat, level surface.

Power Up

1.  Plug one end of power cable into the treadmill as shown.
2.  Plug the other end into a suitable AC outlet (220-240 

volt, 50Hz).

3.  Switch the treadmill on using the on/off switch.
4.  Attach the safety key to the console.

NOTE: Before you run on the treadmill for the first time, allow the 
treadmill to run independently for 10 minutes. Check the running 
mat is tightened correctly and runs smoothly. If you think the 
mat needs adjusting please see next page for more details.

Safety Switch

ON/OFF

Power Cord