background image

your warranty

This product is supplied with a standard warranty as follows:

  Lifetime frame

 

  12 month other parts

  12 months labour

This product is warranted for use in a home, personal, family or household environment

Please Note: Warranty details may vary from one market area to another

Warranty Terms

York Barbell Ltd. warrants that the Product you have purchased from an authorised York reseller is free from defects in materials and 

workmanship.  The Warranty is valid subject to normal and reasonable use in the environment as described above, and correct assembly of 

the product during the warranty period.  The warranty period extends to the original purchaser only.  It is not transferable to anyone who 

subsequently purchases the Product from you.

The warranty excludes normal wear and tear on parts.

Your sales receipt, showing the date of purchase of the product, is your proof of the date of purchase.

This warranty becomes valid only if the Product is assembled / installed according to the instructions / directions included with the product.  

This warranty does not extend to any product that has been damaged or rendered defective: (a) as a result of accident, misuse, abuse or lack 

result of service by anyone else other than York Barbell or an authorised York Barbell warranty service provider.

During the warranty period York Barbell will at no additional charge provide replacement part(s) or repair the product (at York Barbell’s option) 

if it becomes defective, malfunctions or otherwise fails to conform with this warranty under normal, non-commercial, personal, family or 

household use.  In repairing the product, York Barbell may replace defective parts or at the option of York Barbell, use serviceable used parts 

that are equivalent to new parts in performance.  All exchanged parts and products replaced under this warranty will become the property of 

York Barbell.  York Barbell reserves the right to change manufacturers of any part to cover any existing warranty. 

If the product must be returned, you must return the Product or defective part to York Barbell in its original container (or equivalent) with 

Proof of Purchase.  Any evidence of alteration, erasing or forgery of proof of purchase documents will be cause to void this warranty.  You 

must prepay any shipping charges and you are responsible for insuring any product or part that is returned.  Should any product submitted 

for warranty service be found to be ineligible, an estimate of repair cost will be furnished and the repair will be made if requested, upon 

York Barbell’s receipt of payment or acceptable arrangement of payment.  Under no circumstances will returns be accepted without return 

authorisation by our Customer Service department.

To obtain warranty service you must provide the following information: 

Name of Product, Product Code, Batch No, Date Purchased, and Nature of fault or part number required.

Neither dealer of this product nor any retail establishment selling this product has any authority to make any warranties or to promise 

Please note that warranty terms may vary from one market area to another

18

Summary of Contents for anniversary t201





















Reviews: