assembly instructions
6
1. Before you start
1.
Prepare your work area -
it is important you assemble
the product in a clean and
uncluttered space.
2.
Work with a friend -
we recommend you have
someone assist you with
the assembly as some of the
components are quite heavy.
3.
Open the carton -
checking any warnings on
the carton and make sure you
have it the right way up.
4.
Unpack the carton
a. Remove all the parts and
packaging from above the
treadmill and lay them out
on the floor
b. Flatten the sides of the
carton and remove the rest
of the packaging from
around the treadmill
c. Make sure you have
the following parts:
If you suspect you may have some parts missing, please contact
us before going back to your retailer. Refer to the Customer
Support section on page 5 for contact details.
!
This treadmill takes up
a floor space of 185cm x 82cm
and weighs 100kg
!
Safety Key
x 1
Plastic Covers
Left front
support cover
x 1
Fixings
Tools and Consumables
Lubrication
oil
x 6
x 2
x 4
Right front
support cover
x 1
x 6
Speaker wire
x 1
Part
No.
B42
Part
No.
B43
Part
No.
C07
Part
No.
C04
Part
No.
C08
Part
No.
C21
Allen key
(30mm x 70mm)
screw driver
/ spanner
Part
No.
D01
Allen key
(75mm x 75mm)
Part
No.
D02
Part
No.
D03
6mm
screw
curved
washer
20mm
hex head
bolt
flat
washer
Part
No.
B01
Part
No.
B08
