16
46
63
64
23
52
46
8
6. Attach the seat and seat post
1. Attach the seat to the bracket of the seat post as shown.
- (nuts & washers are located on the underside of the seat)
2. Slide the seat post into the seat post mounting tube and
secure in position with the hand wheel
FIXINGS:
FIXINGS:
x 4
Part
No.
42
x 4
Part
No.
10
5. Attach the console
1. Connect the computer wires together as
shown - make sure it’s fully connected
2. Secure onto the bracket using screws as
shown (Screw are located in the back of
the console)
3. Plug the pulse wire into the back of the
computer
FIXINGS:
FIXINGS:
x 4
Part
No.
46
x 1
Part
No.
9
4. Attach the handlebars
1. Slide the computer wires through the hole on
the handlebar fixing bracket as shown
2. Secure in place using bolt & screws as shown
- be sure to fit them in the same order as the
diagram
FIXINGS:
FIXINGS:
x 1
Part
No.
54
x 2
Part
No.
44
52
44
54
9
42
10
12
Make sure the bolts are fully tightened with
the allen key
!
