York Fitness pacer 3501, Instruction Manual

MONITOR POWER SUPPLY

The training computer does not require any battery since it is supplied with power via the 

running treadmill.

PROTECTIVE CIRCUIT

To protect your safety, this treadmill is designed and equipped with run away protection.

If the admissible operating speed of the treadmill is exceeded or fallen below, the protective 

circuit will shut off the treadmill to protect you and the equipment.  The treadmill will flicker all 

display values to alert the user to the condition.  Reset the treadmill by turning the power switch 

on/off to return the treadmill back to the normal operating mode.

TROUBLE SHOOTING

WHEN TO CALL FOR HELP

This treadmill is designed with user safety as the number one priority.   In the event of an electrical

failure, the treadmill will shut off automatically to prevent user injury and to prevent damage to 

expensive components such as the motor.

When you encounter unusual behaviour from the treadmill, simply turn the power switch off and on

to reset the treadmill.

This should clear incidental errors and prepare the treadmill for normal operation again.

If, after you have reset the treadmill by turning the power switch off and on again, the treadmill is 

still not operational, then it is time to call your dealer for advice.

Error 1: Speed sensor error

                Turn the power switch off and on again to reset the treadmill.

                If the treadmill returns to normal operation, you may continue to use the treadmill.   

                If treadmill does not return to normal operation, then call the dealer for advice.

Error 2: Over speed error

                Call your dealer for advice.

Error 3: Safety key error

                Simply secure the safety key in place and then try again. 

TROUBLE SHOOTING GUIDE

 SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY. 

*

*

Problem

Potential Cause

Corrections

   Treadmill will not start

   1. Not plugged in

   1. Plug into grounded outlet.

   2. Safety key not inserted

   2. Insert the safety key into the console.

   3. House circuit breaker tripped

   3. Reset or replace fuse.

   4. Treadmill circuit breaker tripped

   4. Reset the circuit breaker.

       If happens again, lubricate the deck to 

       reduce friction between mat and deck.

   5. On/Off switch on "OFF"

   5. Turn On/Off switch to "ON".

   Running mat slips

   1. Running mat not tight enough

   1. Adjust running mat tension.

   2. Drive belt not tight enough 

   2. Adjust drive belt tension.

   Running mat hesitates 

   1. Insufficient lubrication 

   1. Apply silicone lubricant.

   when stepped on 

   2. Running mat too tight / too loose

   2. Adjust running mat tension.

   Running mat is off center

   Running mat tension uneven 

   Center the running mat.

   across the rear roller