WE RECOMMEND YOU HAVE SOMEONE ASSIST YOU IN LIFTING AND
ASSEMBLING YOUR YORK T535i TREADMILL.
FOLLOW THESE INSTRUCTIONS CAREFULLY AND IT WILL MAKE IT EASIER
FOR YOU TO ASSEMBLE YOUR YORK T535i TREADMILL.
GENERAL
ASSEMBLY INSTRUCTIONS
1.
Ask someone to help you remove all the parts and packaging materials on the top of your
YORK T535i from the carton and place them on the floor carefully.
Rest the left handle bar post, with the locking device
fitted, beside the main frame and close to the handle
bar mounting tube carefully as shown.
Connect the sensor wire socket to the middle wire plug
protruding at the base of the left handle bar post.
NOTE: TAKE CARE to ensure the wires are connected
as tightly as possible.
NOTE TAKE CARE
Product may vary slightly from the item pictured.
2.
CARTON
BASE
MAIN
FRAME
Fold the main frame up and stand it in the carton base
as shown.
Ask someone to help you hold the treadmill on each
side and lift it out from the carton base carefully.
NOTE: Do not lift the treadmill out of the carton
from the motor end as your fingers may
get squashed!!
NOTE: Do not lift the treadmill out of the carton
from the motor end as your fingers may
get squashed!!
3.
2.
1.
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
*
*
YORK T535i TM / 04
A.
B.
Rest the right handle bar post beside the main frame and
close to the handle bar mounting tube carefully as shown.
Connect the incline motor wire socket to the middle incline
wire plug protruding at the base of the right handle bar post.
NOTE: TAKE CARE to ensure the wires are connected
as tightly as possible.
NOTE TAKE CARE
MIDDLE
WIRE
PLUG
LEFT HANDLE
BAR POST
SENSOR
WIRE
SOCKET
MIDDLE
WIRE
PLUG
RIGHT HANDLE
BAR POST
INCLINE
MOTOR
WIRE
SOCKET