AYK550-UH User’s Manual
3
Installation
Installation
Study these installation instructions carefully before proceeding.
Failure to observe
the warnings and instructions may cause a malfunction or personal hazard.
Warning! Before you begin read "Safety" on page 1.
Installation Flow Chart
The installation of the AYK550 adjustable speed AC drive follows the outline below.
The steps must be carried out in the order shown. At the right of each step are
references to the detailed information needed for the correct installation of the unit.
Task
See
PREPARE
for installation
"Preparing for Installation" on page 4.
PREPARE
the Mounting Location
"Prepare the Mounting Location" on page 9.
REMOVE
the front cover
"Remove Front Cover" on page 7.
MOUNT
the drive
"Mount the Drive" on page 8.
INSTALL
wiring
"Install the Wiring" on page 8.
CHECK
installation
"Check Installation" on page 13.
RE-INSTALL
the cover
"Re-install Cover" on page 13.
APPLY
power
"Apply Power" on page 17.
START-UP
"Note! For drives with bypass, if motor is running in
reverse switch incoming power lines at input disconnect."
on page 14.
Summary of Contents for AYK 550
Page 256: ...D1 AYK550 UH User s Manual Appendix D Appendix D Base Drive Drawing 205662 Drawings Fig 1...
Page 257: ...AYK550 UH User s Manual D2 Appendix D Base Drive w Fused Disconnect Drawing 205648 Fig 2...
Page 258: ...D3 AYK550 UH User s Manual Appendix D Base Drive w Non Fused Disconnect Drawing 205647 Fig 3...