AYK550-UH User’s Manual
92
Start-Up
Group 29: Maintenance Trig
This group contains usage levels and trigger points. When usage reaches the set
trigger point, a notice displayed on the control panel signals that maintenance is due.
Group 29: Maintenance Trig
Code Description Range
Resolution
Default
S
2901
COOLING FAN TRIG
0.0…6553.5 kh
0.1 kh
0.0
Sets the trigger point for the drive’s cooling fan counter.
• 0.0 =
NOT
SEL
2902
COOLING FAN ACT
0.0…6553.5 kh
0.1 kh
0.0
Defines the actual value of the drive’s cooling fan counter.
• The parameter is reset by writing 0.0 to it.
2903
REVOLUTION TRIG
0…65535 MRev
1 MRev
0
Sets the trigger point for the motor’s accumulated revolutions counter.
• 0.0 =
NOT
SEL
2904
REVOLUTION ACT
0…65535 MRev
1 MRev
0
Defines the actual value of the motor’s accumulated revolutions counter.
• The parameter is reset by writing 0 to it.
2905
RUN TIME TRIG
0.0…6553.5 kh
0.1 kh
0.0
Sets the trigger point for the drive’s run time counter.
• 0.0 =
NOT
SEL
2906
RUN TIME ACT
0.0…6553.5 kh
0.1 kh
0.0
Defines the actual value of the drive’s run time counter.
• The parameter is reset by writing 0.0 to it.
2907
USER MWh TRIG
0.0…6553.5 MWh
0.1 MWh
0.0
Sets the trigger point for the drive’s accumulated power consumption (in megawatt hours) counter.
• 0.0 =
NOT
SEL
2908
USER MWh ACT
0.0…6553.5 MWh
0.1 MWh
0.0
Defines the actual value of the drive’s accumulated power consumption (in megawatt hours) counter.
• The parameter is reset by writing 0.0 to it.
Summary of Contents for AYK 550
Page 256: ...D1 AYK550 UH User s Manual Appendix D Appendix D Base Drive Drawing 205662 Drawings Fig 1...
Page 257: ...AYK550 UH User s Manual D2 Appendix D Base Drive w Fused Disconnect Drawing 205648 Fig 2...
Page 258: ...D3 AYK550 UH User s Manual Appendix D Base Drive w Non Fused Disconnect Drawing 205647 Fig 3...
