York PACER 3503, Instruction Manual

 SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY. 

*

*

8.

9.

7.

Rest the computer console on the front handle bar 

and connect the computer wire plug to the middle 

wire socket protruding at the top of the left handle bar 

post securely.

Secure the computer console to the handle bar post 

mounting tubes by using, four allen head bolts and

star washers.

Attach the computer console fully onto the handle 

bar post mounting tubes carefully as shown.

HANDLE BAR POST

MOUNTING TUBE

X4

#5532-74

#5532-09

NOW tighten all the bolts you have fitted.

NOW tighten all the bolts you have fitted.

RECHECK

Recheck that all of the bolts are tightened securely for your safety and comfort.

Plug the power cable into a suitable AC outlet (220~240 Volt 50Hz).

Before you use the treadmill for the first time turn on the power switch and connect the 

magnetic safety key.

Allow the treadmill to run for 10 minutes or so without anyone using it.

Check that the mat is tightened properly and runs smoothly.

A.

NOTE: TAKE CARE to ensure the wires are connected 

            as tightly as possible.
            MAKE SURE you fit the connected wire inside of 

            the handle bar post mounting tube properly 

            before attaching the computer console as shown.

NOTE TAKE CARE

MAKE SURE

Attach the handle bar post top covers onto the handle

bar properly as shown.

NOTE: TAKE CARE to ensure the wire does

            not get trapped when you attach the 

            computer console.

            If the console will not align and fit 

            easily, loosen all the bolts fitted so far -

            and try again. 

Push the extra length of wire down into the handle bar 

posts gently while attaching the console.

MIDDLE WIRE

COMPUTER

WIRE

PACER 3503 / 5

10.

HANDLE BAR POST

MOUNTING TUBE

B.