FORM 160.55-O1 (604)
31
YORK INTERNATIONAL
in response to surge events detected by the compres-
sor Variable Speed Drive Adaptive Capacity Control
Board.
Hot Gas Bypass Control Mode
Indicates whether the Hot Gas Bypass is under au to mat ic,
manual or override control. “Override” is dis played dur-
ing Minimum Load over ride conditions or when the
Compressor Motor Variable Speed (if equipped) Drive
is run ning at less than maximum speed.
PROGRAMMABLE
Close Percentage
Service technicians refer to YORK Service Manual
160.55-M1.
Hold Period
Service technicians refer to YORK Service Manual
160.55-M1.
Surge Sensitivity
(Flash Memory Card version C.MLM.02.01.xxx and
earlier. On SURGE PRO TEC TION Screen in later
Flash Memory Card ver sions)
Service technicians refer to YORK Service Manual
160.55-M1.
Minimum Load
Service technicians refer to YORK Service Manual
160.55-M1.
Maximum Open
(Flash Memory Card version C.MLM.02.02.xxx
and later)
Service Technicians refer to YORK Ser vice Man u al
160.55-M1.
[Hot Gas Bypass Control] Open (Manual)
This key puts the Hot Gas Bypass Control in manual
mode and increases the valve position by 5%.
[Hot Gas Bypass Control] Close (Manual)
This key puts the Hot Gas Bypass Control in manual
mode and decreases the valve position by 5%.
[Hot Gas Bypass Control] Auto
Returns the Hot Gas Bypass Control to automatic
mode.
NAVIGATION
Home
Access Level Required: VIEW
Causes an instant return to the Home Screen.
Compressor
Access Level Required: VIEW
Causes an instant return to the Compressor Screen.
2
