ENGLISH
6
OPTIMAL OPERATION
To achieve optimal performance, please note the following:
•
Adjust the air
fl
ow direction correctly so that it is not directed on people.
•
Adjust the temperature to achieve the highest comfort level. Do not adjust the unit to excessive temperature
levels.
•
Close doors and windows on COOL or HEAT modes, or performance may be reduced.
•
Use TIMER ON button on the remote controller to select a time you want to start your air conditioner.
•
Do not put any object near air inlet or air outlet, as the ef
fi
ciency of the air conditioner may be reduced and the air
conditioner may stop running.
•
Clean the air
fi
lter periodically, otherwise cooling or heating performance may be reduced.
•
Do not operate unit with horizontal louver in closed position.
PREPARATION BEFORE INSTALLATION
•
Before doing any work, check the interior power supply cord and the main breaker capacity are suf
fi
cient and the
installation area is suf
fi
cient and complies with the requirements.
•
Check that the power supply available agrees with nameplate voltage.
•
Electrical work, wiring and cables must be performed in compliance with national and local wiring codes and
standard.
•
Do not use the extension cables. In the case extended cables are needed, use the terminal block.
SELECTION OF THE LOCATION
•
Select a place which provides the space around the units as shown in the diagram below.
INDOOR
OUTDOOR
INDOOR
OUTDOOR
Models
18
21
27
30
A
12cm
12cm
12cm
12cm
B
70cm
70cm
70cm
70cm
C
12cm
12cm
12cm
12cm
D
15cm
15cm
15cm
15cm
•
Do not install in a place that cannot bear the weight of the unit.
CAUTIONS
Models
18
21
27
30
A
10cm
10cm
10cm
10cm
B
100cm
100cm
100cm
100cm
C
60cm
60cm
60cm
60cm
D
45cm
45cm
45cm
45cm
J287-EN.indd 6
J287-EN.indd 6
07.03.2006 9:30:11 Uhr
07.03.2006 9:30:11 Uhr
