User Manual
Configuration
YORK Marine, Controls
Revision 1.3 · Updated: 070507
Author: Marc Anderson · Owner: RS
Project : SMS Bridge
Page 8 of 15
File: e:\york\sms bridge\manual\smsbridge-manual_13.doc
Configuration,
Continued
Mail handler configuration
(continued)
Step Action
5
From name:
Enter a name to identify the sender as the SMS Bridge
system. The receiver sees this name in the inbox.
6
Administrator e-mail:
Enter the address for person monitoring the
system.
7 Click
Save configuration
to save the changes.
8 Click
the
Test
button to send a test message from the SMS Bridge to the
administrator.
9
Close the configuration screen and start the service.
SMS bridge
configuration
The SMS Bridge is pre-configured with the settings that are required for most
applications. If the service does not start, verify the settings as described below.
Step Action
1 Click
SMSBridge
in the main screen.
2 Click
the
Config
button. The configuration screen opens.
3
Log interface host
: This is the host name for the GMS log interface.
The setting to use is
logif.reefers-online.com
.
In rare cases it may be necessary to enter the IP address for the
interface. The IP address is currently 195.249.110.24 but is subject to
change.
4
Log interface port:
The value for this setting is
10000
.
5
Close the window and start the service. The service is functioning
correctly if
STARTED
appears in the
Status
field.
Continued on next page
