FORM 155.32-ICOM2.EN.UL
SECTION 6 – OPERATION
ISSUE DATE:1/10/2018
JOHNSON CONTROLS
113
If a failure occurs, you automatically see the failure and alarm screen.For detailed
information on how to change an entry in one of these fields, see
Valve Operation
Control Valve Mode:
Auto / Manual indicates whether the control valve is being operated
automatically or manually. To change to manual operation mode, press and hold the
Manual
button for 3 seconds.
Valve Position Setting:
shows the Capacity Control Valve Position Setting, expressed as
a percentage. In case of the link-less burner, this valve position is for the fuel damper
motor. The air damper position is calculated based on the fuel and air position table.
For detailed information on how to change the valve position setting, see
NOTE: The Valve Position Setting may be changed ONLY when the Control Valve
Mode Manual button is pushed.
NOTE: To move to the Menu screen, set the Control Valve Mode to Auto.
LD20038b
4mADC
20 mADC
(4~20 mADC)
Calculation of Set Point by remote
4~20 mADC Signal (in cooling)
Setting
Base
Temp.
Remote
Setting
Diff.
Setting
Base
Temp.
Remote Setpoint Setting Signal
Setpoint [F°]
LD21977a
9KZZOTM
(GYK
:KSV
8KSUZK
9KZZOTM
*OLL
9KZZOTM
(GYK
:KSV
9KZVUOTZA,qC
狦S'*)
狤狢S'*)
8KSUZK9KZVUOTZ9KZZOTM9OMTGR狦d狤狢S'*)
)GRI[RGZOUTUL9KZ6UOTZH_XKSUZK狦d狤狢
S'*)9OMTGROTNKGZOTM
