SEE HISTORY
SEE LAYOUT DIAGRAM
V02 PRODUCTION NOTES
M1451
1. RTV MUST BE ADDED TO THE FOLLOWING CAPS
C1,C16,C19,C17,C70 BETWEEN C84,C28,C60,C15
BETWEEN C49,C50, ADDED TO C15,C7,C8,C3,C9
C56,C14,C6,C10,C4,C2 AND C12
2. C53 IS 22N FOR BOTH NORTH AMERICA AND CE
3. C3,C7,C6 MUST BE LOW PROFILE PT#5631
4. C8,C9 MUST BE LOW PROFILE PT#5879
5. CUT FUSE HOLDER PINS AND
BLK AND WHT AC WIRES SHORT TO THE SOLDER.
6. AFTER INSERTING S1 #3393 ON THE BOARD BEND TWO DIAGONAL
OPPOSITE PINS TO MAINTAIN STRAIGHT POSITION FOR WAVE SOLDERING.
