12
For example,
_[X] indicates the programming path of the Operator Code administration
as follows:
1.
Hearing the main menu of System Program, you should press 3 to select “To set Ring Times and
Operator Code.” If press # or do nothing, you will exit from the System Program and return to
the main greeting.
2.
Pressing 3, you hear the options on “Ring Times and Operator Code” menu. You should press 5
to select “For Operator Code.” If you press # or do nothing, you will return to the main menu.
3.
Pressing 5, you hear the value of the Operator code. You can change the value by pressing the
desired number. If press #, you will confirm the value as prompted, and return to the previous
menu. If do nothing, you will return to the previous menu and leave the value unchanged.
Each of the following DTMF / Function digits is programmed by pressing two buttons in sequence
on the telephone keypad:
DTMF digits:
*
#
A
B
C
Buttons:
* *
* 1
* 2
* 3
* 4
Each of the following Hexadecimal digits is programmed by pressing two buttons in sequence on
the telephone keypad:
Hexadecimal digits:
A
B
C
D
E
F
Buttons:
* 0
* 1
* 2
* 3
* 4
* 5
