background image

 

 

65 

Examples:   

ADM_4_1_[*001]:   

During the working hours, callers needing help are transferred to *001 Hunt Group. 

ADM_4_3_[Empty]:   

During the break hours, no service operator is on duty. 

ADM_4_5_[9999]:   

During the closed hours, no service operator is on duty; the Mutual Mailbox prompts 
callers to leave a message when they need help. 

ADM_4_7_[9900], MB9900_VM_6_[55553911]: 

During the holidays, callers needing help are transferred to Special External Phone 
55553911. 

ADM_5: Call-Forwarding List 

ADM_5_[N~]_[X~] 

N~:  the extension number 

0~9799= extension numbers or one-digit numbers (Note: numbers from 9800 to 9999 are 

used to identify other feature settings.)   

X~:  the destination that is identified by one of the following numbers. (Default= empty) 

0~8999= internal phone numbers   

9000= using the wrong-number message (

Paragraph 18

 or 19) to respond to the callers 

dialing the extension number   

9900~9989= mailboxes 9900~9989. The phone number of the destination is the Special 

External Phone number that is stored in the VM_6 of the specified mailbox. 

9999= using the mutual mailbox to allow callers to leave a message 

*001~*008= *001 Hunt Group ~ *008 Hunt Group 

Examples:   

ADM_5_[6]_[1234], ADM_5_[567]_[1234]:   

Allow callers to dial 6 or 567 to transfer their calls to internal phone 1234. 

ADM_5_[7]_[*001]:   

Allow callers to dial 7 to transfer their calls to *001 hunt group. 

ADM_5_[8]_[9910], MB9910-VM_6_[55553900]:   

Allow callers to dial 8 to transfer to Special External Phone 55553900. 

ADM_5_[9]_[9999]:   

Allow callers to dial 9 to leave a message, which will be deposited into the mutual 
mailbox. 

ADM_6: Receptionist List 

All the information service receptionists are specified in the Receptionist list. Each information 
menu may have a receptionist: 

ADM_6_[N~]_[X~] 

N~:  1~9989= menu numbers 

Summary of Contents for EVM-8XA Series





















































































Reviews:

Related manuals for EVM-8XA Series