58
Operating-Way of Conference Establishment
SYS_5_0_[X]
X: the
that determines how EVM establishes a 3-party conference
(Default=1)
* = Not using Conference feature
determines the feature code the operating-way may include. But if any Call Retrieving
Way has already included it, you must specify Option 0 for using the Operating-Way defined in
If the PBX does not permit a user to establish a conference call immediately after his dialing the
phone number of the third party, you may add several Cs (a “C” represents a XX-sec pause) at
the end of each external phone number.
Example:
SYS_5_0_[0], ADM_5_9930_[1C3], ADM_5_9931_[*3]:
The Operating-Way of Conference Establishment is: sending a hook-flash, pausing two
seconds and then dialing *3.
SYS_6: Feature Codes
Feature Code of Inward Transfers
SYS_6_1_[X~]
X
~
: the feature code that is dialed before the internal phone number of an inward transfer
(Default= empty)
If no feature code is required, SYS_6_1 must keep the empty value.
Call Retrieval Feature Code
SYS_6_2_[X~]
X
~
: the feature code of call retrieval (Default= empty)
1
st
No-answer Code
SYS_6_3_[XXYZ]
XX: the code of the call type, which informs the EVM to provide the
to the caller.
YZ: the start of the EXTN field inside a DTMF Digit string carrying this Type code
01~09 (1~9), 0* (10)= number of digits before the EXTN field. For example, YZ=03
indicates that the EXTN field starts at the fourth digit of each DTMF digit string that
carries the specified Type code.
*1 ~ *9 = * indicates that the start of the EXTN field is not fixed but follows a digit of *
closely. 1 ~ 9 are used to specify the minimum number of digits (including this *)
appearing before the EXTN field.
#1 ~ #9, A1 ~ A9, B1 ~ B9 and C1 ~ C9 are similar to the functions of *1 ~ *9.
