63
4. Enter the paragraph code. (Or dial the menu number.)
5.
Press 2 to select “To Record”, and then speak to the handset on hearing a beep. Press # to end
recording and return to Step 4 when finish.
6. Repeat Step 4 to 5 for another announcement for the same recording language.
Using a PC
To use this feature, you need to record the desired announcements and record them as PC sound
files (*.wav), or convert them to audio wave files. Then edit each sound file by inserting the given
DTMF tones and voiceless lengths as follows:
“0.2-sec DTMF 2” + “0.5-sec silence” + “the message” + “0.2-sec silence” + “0.2-sec DTMF #”
(The “DTMF 2” is used to start recording; the “DTMF #” is used to end recording.)
To enable the system to record announcements from a PC, you will take the following steps:
1.
Use a 3.5mm- mini-plug modular cord to connect the “Audio In” jack of the EVM to the
“Earphone” jack of the PC. Plug a speakerphone into the “PROG” jack. When the L1 indicator
is off, turn on the “Speaker” and turn off the “Microphone" by pressing the “Mute” button on
the speakerphone.
2.
Hearing the main menu of System Program, press 0 for the main menu of the Administration
Program; then press “2” to select "To Edit Announcements".
3.
Select the recording language, or dial 9 for information announcements.
4.
Enter the paragraph code, or dial the menu number of information announcement.
5.
Play the sound file on the PC, and then listen to the sound through the "Speaker" until the
system prompts: "Please enter the paragraph code."
6.
Repeat Step 4 to 5 for another announcement of the same recording language. If finished, you
must remember to remove the connection from the “Audio In” jack.
ADM_3: Weekly Working Hour Schedule and System Clock
Weekly Working Hour Schedule
ADM_3_[W]_[HHMMhhmm]
W: 1= Monday (Default= 0830~1730)
2= Tuesday (Default= 0830~1730)
3= Wednesday (Default= 0830~1730)
4= Thursday (Default= 0830~1730)
5= Friday (Default= 0830~1730)
6= Saturday (Default= empty)
7= Sunday (Default= empty)
8= the break hours on each weekday (Default= 1200~1300)
HHMM: the beginning time, hhmm: the ending time of the working hours.
HH/hh= Hour (00~23), MM/mm= Minute (00~59).
Empty= weekend (W=1~7); no break hour (W=8)
