73
ADM_5_9934_[X~] (Default= empty)
ADM_5_9935_[X~] (Default= empty)
Example:
ADM_5_9933_[132], ADM_5_9934_[#4]:
The Operating-Way is: sending a hook-flash, #4, and the phone number.
Ring Pause
Conference Time Length
Call-Hold Procedure Control
ADM_5_9937_[abcd]
a:
the maximum time of a pause between the rings of an incoming call
1~9= 1~9 seconds, 0= 6 seconds (Default)
b: the maximum time of a conference call
0 or 1= 10 (Default), 2= 20, 3= 30, 4= 40, 5= 50, 6= 60, 7= 70 minutes
c:
the option that specifies the transfer-type skipping the Hold procedure
0= not using this feature (Default)
1= inward and outward transfers
2= outward transfers
d: 0
Mailbox Owner Self-registration
ADM_5_9938_[abcd]
a:
0
b: 0
c:
0
d: the option that determines whether Mailbox Owner Self-registration is allowed
0= allowing Mailbox Owner Self-registration (Default)
1= not allowing Mailbox Owner Self-registration
Call Disconnection Number
ADM_5_9939_[X~]
X~: the DTMF digits that the PBX sends on a call, which indicates the connection has been
disconnected.
Special C.O Trunk Group Access Code
ADM_5_9948_[X~]
X~: the Special C.O Trunk Group Access Code, in which a “
C”
represents an XX-sec pause.
This code cannot begin with 00. Otherwise: