3
Assembly:
STEP 1
A. Attach the upper bracket (B) onto the lower bracket
(A).
STEP 2
B. Attach the lower umbrella pole (C) to the upper bracket (B) and
lower bracket (A) using Bolt M8x20 (D),Washer (E) and
Wrench(H).
STEP 3
C. Place something heavy like marble or At Home Offset
Umbrella Base to support the weight of whole umbrella.
STEP4
D. Push the long bent tube of the umbrella shade (G)
outwards a little while holding down the tap on the
short bent tube to make the hinge slide snap into
place as shown below.
Summary of Contents for UXM008016A
Page 7: ...7 ...
