5.2.
Carrier
5.2.1.
Disassemble a motor arm
Preparation
See section
5.1.
Procedure
1.
Lift the wheelchair until the wheels are free
from the floor.
•
Use a lifting platform.
2.
Remove cap A.
3.
Remove screw B and bearing holder C.
•
Use an allen key size 7.
•
The screw is secured with locking glue.
4.
Hold the motor arm (D) in position and
carefully slide it outward.
•
The rubber suspension (E) is not screw
fixed but may need some help to loosen
from the motor arm.
5.
Take the motor cable out of the carrier.
E
E
D C
B A
A number of parts are now accessible for repairs. See the applicable procedure for further
instructions.
5.2.2.
Replace a rubber suspension
Preparation
See section
5.2.1.
Procedure
1.
Remove the old rubber suspension (A) from
the carrier frame.
2.
Put the new rubber suspension on the
carrier frame.
3.
Install the motor arm on the wheelchair. See
section
5.2.5.
A
Maintenance tasks & adjustments
Service manual - Luca
19