21
ENGLISH
8. LCD Display
8.3 General Operation
·
Switching the E-bike System Mode ON/OFF
After long pressing the
ON/OFF
button, display starts to work and provides working
power of controller. In the power-on state, long press the
ON/OFF
button to turn off
the power of E-Bike. In the power-off state, the display no longer uses battery power,
and the leakage current of the display is less than 1uA.
If the display is not used of more than 15min, the display will shut down automatically.
·
Display interface
After display is turned on, it defaults to display Real-time speed and ODO (km). Short
press the
ON/OFF
button to display the information of Real-time speed (km/h), Trip
(km), ODO (km/h), Riding time (hour/minute/second), Average speed (km/h), Max
Speed (km/h).
Display indication cycle interface
·
Push-assist Mode
Short press the
ON/OFF
button then long press the
DOWN
button for 1 second, the
E-Bike enters the state of push-assist mode, and the vehicle will run at a constant
speed of 6km/h, and the screen will display P. Release the
DOWN
button, the E-Bike
will immediately stop power output and return to the previous state.
Push-assist display interface
The push-assist function can only be used when the users push vehicle,
please
DO NOT
use this function in riding state.
Summary of Contents for MTB EVEREST
Page 132: ...132 YOU RIDE EVEREST Notas Notes...
Page 133: ...133 PORTUGU S Notas Notes...
Page 134: ...134 YOU RIDE EVEREST Notas Notes...
Page 136: ...ERSAX TRADE S L Jos S nchez Pescador 10 Madrid 28007 SPAIN...
