40
5
Measurements
The operation of measurement can be divided into conventional measurement and applied
special measuring package.
CAREFUL
1.
All unsaved data will be lost by shutting down during the
measurement process.
2.
During the measurement process, all measurement
information on the image will be deleted and the conventional
measurement data will be lost once the frozen state is lifted.
3.
A change in mode clears the conventional / applied special
measurement data on the screen.
4. Don’t do meaningless measurements.
5.1
Conventional measurements
5.1.1
2D Conventional measurements
2D conventional measurements are suitable for regular measurements of 2D images
such as B, Color, Power and so on. The items of measurement are as follows:
Measure item
Function
Distance
Measure the distance between two points on an ultrasonic image.
Angle
Measured the angle between the two intersecting planes on the
ultrasonic image.
Area
Measure the area and perimeter of an enclosed area on an
ultrasonic image.
Three distance
volume
Measure the volume of the target object.
Recording length
Measure the length of a curve on an ultrasonic image.
Recording area
Measure the area and perimeter of a closed curve area on the
ultrasound image.
Length ratio
Measure the length of the two lines on the ultrasonic image and
calculate the ratio.
Area ratio
Measure the area of two enclosed areas on ultrasonic images and
calculate the ratio.
Histogram
Measure the gray distribution of ultrasonic echo signal in a closed
area of ultrasonic image.
