10
Cleaning and Maintenance
Notice:
When emptying the water reservoir, pour water from the opposite side
of the base ventilation hole.
•
Always turn off and unplug the diffuser prior to cleaning.
•
To ensure proper performance, clean the ultrasonic plate and lid after
each use.
•
If essential oil begins to build up on the ultrasonic plate, gently wipe it
off using a cotton swab dipped in rubbing alcohol, vinegar, or Thieves®
Household Cleaner.
•
If essential oil begins to build up on the lid, gently wipe it off using
mild soap and water only. Never use a corrosive detergent to clean the
ultrasonic plate or damage will occur.
•
Periodically check under the diffuser to keep the fan intake free of debris.
Debris can be removed by blowing on the fan intake opening or wiping
with a clean, dry cloth. Do not use aerosol sprays, solvents, or abrasives
to clean the plastic housing.
•
When the diffuser is not in use, clean it and let it dry before storing.
Troubleshooting
When switched on, the diffuser does not operate. (Potential issues: low
battery, water above water fill line marker.)
•
Charge the diffuser for up to 4.5 hours. Check that the adapter is
securely plugged into the wall socket and the rear of the diffuser.
•
Check that water is in the reservoir and it is not above the red water fill
line marker. If there is too much water, unplug the unit and carefully pour
out the excess water from the opposite side of the base ventilation hole.
When you restart the diffuser, the light should come on and the diffuser
should mist.
Notice:
When emptying
the water reservoir,
pour water from the
opposite side of the
base ventilation hole
