![background image](http://html1.mh-extra.com/html/youngman-richardson-and-co/jibbi-1250-evo/jibbi-1250-evo_user-manual_3562846020.webp)
The function is only activated if the longitudinal inclination of the carriage is less than 5°.
With this function active, the hydraulic motors are put in series and engine displacement of the same
is activated.
In this way it is possible to move only in a straight line (it is not possible to steer) but at twice the
speed of the standard mode.
Attention
: With the Booster function active, when the joystick is released the machine does not stop
immediately but there is a deceleration ramp. The space travelled before it stops can even be of 50
cm.
2.1.2.3
Optional mode: translation control command with the right Joystick
Pressing button 11 (Violet "FAST DRIVE”) and positioning the potentiometer (7) at a value below
90% activates the driving mode with joystick (the display will show "FAST DRIVE”)
With this function enabled, it is possible to control the machine translation in a straight direction and
in steering simply by operating the Joystick (2) only.
The mode remains active until the button 11 is pressed again or until the machine is switched off by
means of an emergency key or mushroom button.