youngmangroup.com
6
StairMax 600
Assembly Procedure
5
Now attach the four guard rails (see illustration)
ensuring that the claws face outward. To
complete the tower, the toeboards must be fitted on
all four sides of the platform.
6
Now refer to the stabilisation guide (Page 7) and
table to use the correct means of stabilising the
tower.
The manufacturer strongly recomends that ballast is
used in all applications
in addition to any method of
stabilisation used. Please contact your supplier ro
hire shop for details.
If stabiliser(s) are required, they must be fitted to
the corner(s) of the end frame on the lower step,
angled at 45 degrees. The clamps should be fitted to
the clear sections of the frame uprights, away from
the interlock clips and rungs. Once fitted they must
have a minimum sideways extension of 650mm and
also reach down the stairs for a minimum distance
of 650mm. Ensure that the rubber foot is firmly
in contact with the ground, and that the stabiliser
clamps ae securely tightened.
