accurate timing. If reception fail, scanning stops (“
” on LCD disappear)
The clock can be set to scan the time signal manually by holding “
” button
(B3) for 3 seconds. Each reception takes about 5 minutes.
Stop scanning by holding “
” button (B3) for 3 seconds.
“
” shown on the LCD if it is in daylight saving time mode
4.2 Manual Time Setting:
In time display mode, hold “MODE” button (B1) for 3 seconds to enter
Clock/Calendar setting Mode.
Press “
▲
” (B2) or “
▼
” (B3) button to adjust the setting and press “MODE”
button (B1) to confirm each setting.
(By keeping the “
▲
” (B2) or “
▼
” (B3) button pressed, could accelerate the
process and reach the desired value more quickly)
The setting sequence is shown as follow: 12/24Hour, RCC on/off, Hour, Minute,
Second, Year, Month, Date, Temperature Unit, Alarm sound duration.
There are 10 languages for day of week: German, English, French, Italian, Dutch,
Spanish, Danish, Czech, Polish, Swedish
Note
:
(1)
All Setting mode will automatically exit in 15 seconds without any adjustment
(2)
Alarm sound duration: there are two options available, “1 minute” and “2
minutes”.
(3)
Second only can be adjusted to 0.
4.3 Daily Alarm Function:
Press “ MODE” button (B1) select to view alarm Time, “ALARM TIME” flashes on
the display
When viewing the Alarm Time, hold “MODE” button (B1) for 3 seconds to enter
alarm time setting. Press “
▲
” (B2) or “
▼
” (B3) button to adjust the alarm time.
Press “MODE” button (B1) to confirm the setting.
4.3 Snooze Alarm Function:
Press “ALARM ON/OFF” Button (B4) to activate or deactivate the alarm. If the
alarm is on, alarm icon "
" appears on the display.
Slide alarm mode switch (B7) to select the daily alarm alerts in weekday only
3
