background image

6

Indoor Data:

Temperature range:

-9.9 to 50°C [+14.2 to +122°F]

Temperature Units Measured:

°C or °F [switch able]

Humidity Range:

20% to 95%

Outdoor Data:

Transmission distance:
(open area)

30m @ 433MHz

Temperature range:

-20 ~ 50°C [-4 ~ +122°F]

Humidity Range:

20% to 99%

Mount:

wall / table

Main Unit Dimensions:

W136x h82x d17 mm

Thermo Sensor Dimensions: 

w62 x h101 x d24 mm

Battery Requirements:

Base Station [indoor]:

2 x AAA batteries 

Sensors [outdoor]:

2 x AAA batteries

Please note:  Batteries are not including

11.

Products and batteries:

Products and batteries should not be disposed of with normal household waste.

According to Directive 2012/19/EU, the device is to be supplied at the end of its useful 

life to a proper disposal. The valuable materials contained in the device are supplied to 

recycling  and  avoid  the  burden  of  the  environment.  Please  take  this  device  to  a 

collection point for electronic waste or a recycling center.

Remove the batteries from the unit before disposing of it and dispose of them separately. 

Consumer  is  legally  obliged  to  dispose  of  used  batteries  at  a  collection  point  for  used 

batteries,  at  a  local  recycling  center  or  at  the  battery  point  of  sale,  for  further  information, 

contact your local waste disposal company or local government.

12: LIABILITY DISCLAIMER: 

• The electrical and electronic wastes contain hazardous substances; Disposal of 
electronic waste in wild country and/or in unauthorized grounds strongly damages 
the environment. 

• Please contact your local and/or regional authorities to retrieve the addresses of 
legal dumping grounds with selective collection. 

Summary of Contents for YC9080








Reviews: