10
RADIO CONTROLLED/ATOMIC CLOCK FUNCTION
When the unit receives RCC signal, a sync-time symbol will appear on the LCD, and
synchronizes daily.
Note:
1. The strength of radio-controlled time signal from the transmitter tower may be affected by
geographical location or building around.
2. Always place the unit away from interfering sources such as TV set, computer, etc.
3. Avoid placing the unit on or next to metal plates.
4. Closed areas such as airport, basement, tower block, or factory are not recommended.
SIGNAL STRENGTH INDICATOR
The signal indicator displays signal strength in 4 levels. Wave segment flashing means time
signals are being received. The signal quality could be classified into four types:
or
No signal quality
Weak signal quality
Acceptable signal quality
Excellent signal quality
TIME SETTING
The unit automatically set itself accordingly to the Radio Controlled Clock signal it received. To set
the clock/calendar manually, first disable the reception by holding the RCC button for 8 seconds.
TO MANUALLY SET THE CLOCK / TIME ZONE SELECTION
1. Press and hold
[ CLOCK ]
button
2 seconds until
12 or 24 Hr
flashes.
2. Use
[ ]
button /
[ ]
button to adjust, and press
[ CLOCK ]
button
to proceed to the next
setting.
3. Press
[ CLOCK ]
button
again to step the setting items in this sequence: Hour format
Hour
Minute
Second
Year
Month
Date
Hour offset
Language
DST AUTO/OFF.
Note:
1. The unit will automatically exit setting mode if no button was pressed in 60 seconds.
2. The hour offset is for MSF version. Its range is between -23 and +23 hours.
3.
DST
(Daylight Saving Time) feature is set to Auto (factory set).The clock has been
programmed to automatically switch when the daylight saving time is in effect. User can
set the
DST
to
OFF
to disable the feature.
DISABLE / ENABLE RCC SIGNAL RECEPTION
1. Press and hold the
RCC
button 8 seconds to disable the reception.
2. Press and hold the
RCC
button 8 seconds to enable automatic RCC reception.
RC on
RCC on
RCC off
TO TURN ON/OFF ALARM CLOCK (WITH ICE-ALERT FUNCTION)
1. Press the
[ ALARM ]
button anytime to show the alarm time.
2. Press the
[ ALARM ]
button to activate the alarm.
