7
OTHER SETTING OF THE CONSOLE
MOON PHASE
The moon phase is determined by the time, date and time zone . The following table explains
the moon phase icons of the Northern and Southern hemispheres . Please refer to
ORIENTING
THE 6-IN-1 SENSOR TOWARDS SOUTH
section about how to setup for the Southern
hemispheres .
Northern hemisphere
Moon Phase
Southern hemisphere
New Moon
Waxing Crescent
First quarter
Waxing Gibbous
Full Moon
Waxing Gibbous
Third quarter
Waxing Crescent
SETTING ALARM TIME
1 . In normal time mode, press and hold
[ ALARM ]
key for 2 seconds until the alarm hour digit
flashes to enter alarm time setting mode.
2 . Press
[ GRAPH / ]
or
[ HISTORY / V ]
key to change the value . Press and hold the key
for quick-adjust .
3 . Press
[ ALARM ]
key again to step the setting value to Minute with the Minute digit flashing.
4 . Press
[ GRAPH / ]
or
[ HISTORY / V ]
key to adjust the value of the flashing digit.
5 . Press
[ ALARM ]
key to save and exit the setting .
NOTE:
-In alarm mode, the “ ” icon will display on the LCD .
-The alarm function will turn on automatically once you set the alarm time .
ACTIVATING ALARM AND TEMPERATURE PRE-ALARM FUNCTION
1 . In normal mode, press
[ ALARM ]
key to show the alarm time for 5 seconds .
2 . When the alarm time displays, press
[ ALARM ]
key again to activate the alarm function .
Or
press
[ ALARM ]
key twice to activate the alarm with ice pre-alarm function .
Alarm off
Alarm on
Alarm with ice-alert
NOTE:
Once the ice pre-alert activates, the pre-set alarm will sound and alert light will flash 30 minutes
earlier if the outdoor temperature is below -3°C .
