8
When clock reach the alarm time, alarm sound will start .
Where it can be stopped by following operation:
-Auto-stop after 2 minutes alarming if without any operation and the alarm will activate again in
the next day .
-By pressing
[ SNOOZE / LIGHT ]
key to enter snooze that the alarm will sound again after 5
minutes .
-By pressing and hold
[ SNOOZE / LIGHT ]
key for 2 seconds to stop the alarm and will
activate again in the next day
-By pressing
[ ALARM ]
key to stop the alarm and the alarm will activate again in the next day .
NOTE:
-The snooze could be used continuously in 24 hours .
-During the snooze, the alarm icon “
” will keep flashing.
TEMPERATURE / HUMIDITY FUNCTION & TREND
Press
[ °C / °F ]
key to switch between °C /°F temperature unit .
The temperature / humidity trend indicator shows the trends of changes in the forthcoming few
minutes .
Arrow indicator
Temperature / Humidity trend
Rising
Steady
Falling
NOTE:
-When temperature is below -40°C, the LCD will display “Lo” . If temperature is above 80°C,
LCD will display “HI” .
-When humidity is below 1%, LCD will display “Lo” . If humidity is above 99%, LCD will display
“HI” .
VIEW THE OUTDOOR CHANNEL (Optional feature with add on extra thermal hygro
sensors)
This console is capable to pair with a wireless 6-in-1 sensor and up to 7 wireless thermal-hygro
sensors . If you have 2 or more sensors, you can press
[ CH ]
key to switch between different
wireless channels in normal mode, or press and hold
[ CH ]
key for 2 seconds to toggle auto-
cycle mode to display the connected channels at 4 seconds interval .
During auto-cycle mode, press
[ CH ]
key to stop the auto cycle and display the current
channel .
WIRELESS SENSOR SIGNAL RECEIVING
1 . In normal mode, press
[ SENSOR / SYNC ]
key once to start receiving the sensor signal of
current on displaying channel. The signal icon will flash.
- For example, when CH 1 is displayed, pressing
[ SENSOR / SYNC ]
key will start receive
for CH 1 only .
2 .
The signal icon will flash until the reception succeeded. If no signal is received within 5
minutes the icon will disappear .
No signal
Weak signal
Good signal
3 . If the signal for outdoor channel has discontinued and does not recover within 15 min,
the signal icon will disappear . The temperature and humidity will display “--” for the
corresponding channel .
