16
SETTING ALARM TIME
1 . In normal time mode, press and hold
[ ALARM ]
key for 2 seconds until the alarm hour digit
flashes to enter alarm time setting mode.
2 . Press
[ GRAPH / Λ ]
or
[ °F / °C / V ]
key to adjust the value, or press and hold to change
rapidly .
3 . The setting sequence is: Hour
→
Minute .
4 . After completing the minute setting, press
[ ALARM ]
key to save and exit the setting mode .
Note:
-The alarm will automatically be turned on with the icon “ ” displays after you set the
alarm time .
-Press
[ ALARM / SNOOZE ]
key to stop the current alarm and enter snooze . The alarm
icon will flash continuously. The alarm will sound again after 5 minutes. Snooze can be
operated continuously in 24 hours .
-When the alarm sounds, it will stop automatically without pressing any button in 2 minutes .
Also, you can press and hold the
[ ALARM / SNOOZE ]
key for 2 seconds or press
[ALARM ]
key to stop the current alarm . The alarm will repeat in the next day .
ACTIVATING ALARM AND TEMPERATURE PRE-ALARM FUNCTION
1 . In normal mode, press
[ ALARM ]
key to show the alarm time for 5 seconds .
2 . When the alarm time displays, press
[ ALARM ]
key again to activate the alarm function .
Or
press
[ ALARM ]
key twice to activate the alarm with ice pre-alarm function .
Alarm off
Alarm on
Alarm with ice-alert
Note:
Once the ice pre alert activates, the preset alarm will sound 30 minutes earlier if the outdoor
temperature is below -3°C .
INDOOR AND OUTDOOR TEMPERATURE & HUMIDITY
You can view the in/outdoor channels' temperature & humidity readings and the related
information at the top-left or middle left column of the LCD .
Note:
In normal mode, press
[ °F / °C / V ]
key to switch between °C/°F .
The
OUTDOOR
Window
The OUTDOOR window displays the thermo-hygro readings of wireless
outdoor 6-in-1 weather sensor .
Wireless outdoor sensor signal strength:
No signal
Weak signal
Good signal
Note:
Please locate the console where can receive good sensor signal .
