9
8. Light
Press “DIMMER” button (B4) to adjust the LED brightness.
9. Low battery indication:
The low battery icon “
”will appear and indicating that thermo sensor is in
low battery status. The batteries should be replaced.
10.
Precautions
Use a pin to press the reset button if the unit does not work properly.
Avoid placing the clock near interference sources/metal frames such as computer or TV sets.
The clock loses its time information when the battery is removed.
Do not expose it to direct sunlight, heavy heat, cold, high humidity or wet areas
The outdoor sensor must not be set up and installed under water. Set it up in away direct
sunlight and Rain
Never clean the device using abrasive or corrosive materials or products. Abrasive cleaning
agents may scratch plastic parts and corrode electronic circuits
If there is any inconsistency of weather forecast between Local Weather Station and this unit,
the Local Weather Station's forecast should prevail. The manufacturer will not take
responsible for incorrect forecasting from this unit
9
Caution!
The manufacturer is not responsible for any radio or TV or other electronics device interference near by .
Unauthorized modifications to this equipment. Such modifications could void the user authority to
operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or written
permission of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly checked and
corrections are included in subsequent editions. We disclaim any responsibility for any technical error
or printing error, or their consequences.
All trademarks and patents are recognized
All enquires:
Summary of Contents for YC9431
Page 10: ...10...
