OPERATING & MAINTENANCE MANUAL MODEL : EHA series
YOUYANG AIRPORT LIGHTING EQUIPMENT INC. Page
24/55
3) Runway end light.
-. Runway end lights shall be provided for a runway equipped with runway edge
lights.
-. When the threshold is at the runway extremity, fittings serving as threshold lights
may be used as runway end lights.
-. Runway end lights shall be placed on a line at right angles to the runway axis as
near to the end of the runway as possible and, in any case, not more than 3m
outside the end.
-. Runway end lighting should consist of at least six lights.
-. For a precision approach runway category III, the spacing between runway end
lights, except between the two innermost lights if a gap is used. It should not be
exceeded 6m.
-. Runway end lights shall be fixed unidirectional lights showing red in the direction
of the runway. The intensity and beam spread of the lights shall be adequate for
the conditions of visibility and ambient light in which use of the runway is
intended.