background image

 

 

ARTICLE NUMBER: 50462040  

 

 

 

 

 

MANUAL OVERRIDE

 

 

 
Instruction 

Welcome to use ST05N infrared Presence sensor! 

Congratulation on purchasing your new sensor and thank you for the confidence you have shown in 
us. You have chosen a high-quality product that has been manufactured, tested and packed with the 
greatest care. Please familiarize yourself with these instructions before attempting to install the product 
because  prolonged,  reliable  and  trouble-free  operation  will  only  be  ensured  if  it  is  fitted  and  used 
properly. We hope your new sensor will bring you lasting pleasure 

SPECIFICATION: 

Power Source: 220-240V/AC                                      Detection Range: 360

°

 

Power Frequency: 50/60Hz                                        Detection Distance: 20m max(<24

)

 

Ambient Light: <3-2000LUX (adjustable)                  Working Temperature: -20~+40

 

Time Delay: Min.10sec

±

3sec                                    Working Humidity: <93%RH 

                      Max.30min

±

2min                                    Power Consumption: approx 0.5W 

Rated Load: Max.2000W                                              Installation Height: 2.2-4m 

                                1000W                                            Detection Moving Speed: 0.6-1.5m/s 

IP Class: IP65 

FUNCTION: 

Ø

 

Can identify day and night: The consumer can adjust working state in different ambient light. It 
can work both in the daytime and at night when it is adjusted to the “sun” position (max). It can 
work in the ambient light less than 3LUX, when it is adjusted to the “3” position (min). As for the 
adjustment pattern, please refer to the testing pattern.   

Ø

 

Time-Delay is added continually: When it receives the second induction signal within the first 
induction, it will restart to time from the moment.   

MANUAL OVERRIDE FUNCTION: 

1. Sensor mode 

  Stay on   

Now switch wall switch OFF-ON, OFF-ON twice within 3seconds. The sensor will now hold your light 
ON continuously just likes a normal light. 
2. Stay on 

  Sensor mode(The following either method is ok) 

1).Switch your wall switch OFF, then switch ON after 0.3seconds. 
2). If the light left ON (not change the sensor to sensor mode by hand), the sensor itself will also 
automatically return to the sensor mode after 8hours.

 

 
 
 
 
 

Good sensitivity                                                              Poor sensitivity 

SENSOR INFORMATION: 

 
 
 
 
 
 
 

Height of installation: 2.2-4m 

Detection Distance: Max.20m 

 

Reviews: