background image

http://www.ysvacuumsealer.com

7

to make an instant sealing.

4. The machine is sealing the bag when the blue indicator light blinks.
5. Once completed the indicator light will turn off ; hands off and press

the release button to open the lid. The custom sized bag is now
ready for vacuum sealing.

CAUTION :

Make sure you give the appliance time to cool down. Wait

at least 20 seconds between seals. Under very heavy usage, appliance
will shut off automatically to prevent overheating. If it does, wait 25
minutes to allow appliance to cool off.

How to Vacuum Seal with the Vacuum Bags

1. Place the item(s) to be sealed into the pre-cut or custom sized bag.

Leave at least 2 inches between the contents and the top of the
bag to allow for bag contraction.

2. Open lid and place the open end of the bag down into the vacuum

chamber.

3. Close lid by pressing down on both sides. Keep pressing both side

of lid to make vacuumizing and sealing.

4. Once the indicator light has turned off, hands off,

press the

release button to open lid and take out the bag with food well
packed.

How to use the seal button

This buttn is used when vacuum packing delicate food or food with
liquid or in any other cases that pre-sealing is needed. While the
machine is vacuumizing the bag, press this button with your left

Summary of Contents for VS66












Reviews: