650 MDS
Section 3
YSI, Incorporated Drinking Water Monitoring Systems Operations Manual
3-55
Once these conditions are met, follow the instructions in Section 3.5.3 above for logging of sonde sensor
readings to 650 memory. The barometer readings will automatically be added to the file at the sample interval
selected for the sonde readings.
Barometer readings stored in 650 memory will remain as part of the sensor data file that can be viewed
from the 650 display and/or uploaded with the data file for analysis in EcoWatch for Windows. The
barometric pressure readings are processed as a normal parameter by EcoWatch, with the user having the
ability to change units from the EcoWatch menus. For example, data stored in 650 memory in units of mm
Hg units can easily be converted to readings in mBar after upload.
3.10 UPGRADING 650
3.10 UPGRADING 650
3.10 UPGRADING 650
3.10 UPGRADING 650 SOFTWARE
SOFTWARE
SOFTWARE
SOFTWARE
The 650 software can easily be upgraded from the YSI World Wide Web page (
www.ysi.com)
. However,
before accessing the Web page, the instrument should be prepared for upgrade by attaching the MS-8 end of
the YSI 655174 PC Interface cable to the 650 and the DE-9 end of the 655174 to a serial port of a PC which
has Internet access as shown below:
Once the setup is complete, access the YSI Web Page and locate the section on software upgrades. Select
the 650 upgrade entry and follow the instructions provided on the Web Page. If you encounter difficulties
in the upgrade procedure, contact YSI Customer Service for advice.
650
655174 PC Interface
Cable
Computer
with Internet
Access
DE-9 Serial
Port
