1 6
y t
Unscrew the brake clamp bolts (Torx T25).
Remove the clips on the brake and shifter
cables.
Inverse the brakes so that the front brake is
on the right-hand side and the rear brake on
the left.
Attach both brake levers to the handlebar by
using the brake lever clamps.
Torque the brake clamp bolts to spec
(5 – 6 Nm).
Use an allen key to install the pedal in the
crankarm. Grease the threads of the pedal to
ensure it can function as intended (including
future removal). Note that there is a left- and
right-hand side pedal.
The pedal on the non-drive side is left-threaded
and should be tightened in the counter-clock-
wise direction.
BRAKE SWAP SRAM
PEDAL ASSEMBLY
7.1
7.3
7.4
7.2
6.1
6.2
