SMART POSITIONER
TMP-3000
PRODUCT MANUAL
Ver. 1.03
4
1.
Introduction
1.1
General Information for the users
Thank you very much for purchasing our products. Our products are manufactured,
inspected and delivered in uniform quality with strict regulations at the factory. To use
this product correctly and efficiently, please read this manual carefully before installing
and using the product.
➢
The manual should be provided to the end-user.
➢
The contents of this manual are subject to change without prior notice. Product
specifications, designs and parts are not immediately reflected in the manual when
they are changed, but are reflected in the next revision.
➢
The meaning of the valve original point (Zero) in this manual is the position of the
valve when the air pressure is completely out of positioner OUT1. That is, in the case
of the linear direct acting type actuator, the stem of the actuator is raised when the
air pressure is completely released from the OUT1 of the positioner. In the case of
the linear dynamic type actuator, when the air pressure is completely released from
the OUT1 of the positioner, the stem of the actuator comes down and this is called
original point (Zero).
➢
This manual cannot be reproduced or reused for any purpose without our approval.
➢
If any problem arises that is not described in this manual, please contact us
immediately.
➢
This product is an accessory device of control valve. Be sure to read the instruction
manual of the corresponding control valve before starting operation.
1.2
Safety precautions and Manufacturer Warranty
➢
When handling this product, for the protection and safety of the operator, the
product and the system in which the product is installed, should follow the safety
instructions mentioned in this manual. If you do not follow the safety instructions in
this manual correctly, we cannot guarantee the safety of the operator.
➢
Any changes or repairs to the product are allowed only when described in this
manual. If any changes or modifications are made by the customer, we will not
compensate for any personal or material damage that may occur. If you need to
change or modify the product, please contact us.
➢
The warranty period of the product is 18 months based on the date of shipment
unless stated otherwise.
➢
If any misuse, accident, alteration, modification, manipulation, negligence, improper
installation, improper maintenance, repair, maintenance or service, or model or serial
number change, manipulation, Damage, disasters, power surges, or serious damage