3
TIME
TIME
TIME
TIME and
and
and
and ALARM
ALARM
ALARM
ALARM CLOCK
CLOCK
CLOCK
CLOCK
RECEPTION
RECEPTION
RECEPTION
RECEPTION OF
OF
OF
OF THE
THE
THE
THE RADIO
RADIO
RADIO
RADIO SIGNAL
SIGNAL
SIGNAL
SIGNAL
•
The clock automatically starts the DCF77 signal search on any restart or if the
batteries are changed. The radio mast symbol starts to flash.
•
At 1:00AM to 5:00AM the Radio Controlled clock automatically carries out a
synchronization procedure with the DCF77 signal to correct any deviations to the exact
time. If this synchronization attempt is unsuccessful (the radio mast symbol disappears
from the display), the system will automatically attempt a new synchronization at the
next full hour. This procedure is repeated automatically up to four times.
•
To start manual DCF77 signal reception, press and hold the “+ and -“ buttons together.
If no signal is received within seven minutes, then the DCF signal search stops (the
radio mast symbol disappears) and starts again the next full hour.
INFORMATION:
•
A flashing radio mast symbol indicates that the DCF77 signal reception has started.
•
A continuously displayed radio mast symbol indicates that the DCF77 was received
successfully.
•
We recommend a minimum distance of 2.5 meters (8.2 Feet) to all sources of
interference such as televisions or computer monitors.
•
Radio reception is weaker in rooms with concrete walls (e.g. in cellars) and in offices.
In extreme cases, place the system at a window.
•
As there is less atmospheric interference at night, radio reception is normally possible
at this time. A single synchronization each day is sufficient to keep the time display
accurate to one second.
DAYLIGHT SAVINGS TIME – The radio controlled clock will automatically set itself in the
spring and then again in the fall for the winter/summertime change.
MANUAL
MANUAL
MANUAL
MANUAL TIME
TIME
TIME
TIME SETTING
SETTING
SETTING
SETTING
•
Press and hold down the “MODE” button for three seconds.
•
The year display starts to flash. Now use “+" or " -“ to set the correct year.
•
Press, “MODE” to confirm your setting.
•
The month display starts to flash. Now use “+" or "-“ to set the correct month.
•
Press, “MODE” to confirm your setting.
•
The date display starts to flash. Now use “+" or " -“ to set the correct date.
•
Press, “MODE” to confirm your setting.
•
The time zone display starts to flash, Now use “+" or " -“ to set the correct time zone.
•
Press, “MODE” to confirm your setting.
•
The weekday starts to flash. Now use “+" or " -“ to set your want language. There are
seven languages available for the day display: German, English, Italian, French, Dutch,
Spanish or Danish.
•
Press, “MODE” to confirm your setting.
•
The 24Hr display starts to flash. Now use “+" or " -“ to set the 12Hr or 24Hr for the
time format. In the 12Hr mode, the symbol AM (before midday) or PM (after midday)
will be shown in the display.
•
Press, “MODE” to confirm your setting.
•
The hour display starts to flash. Now use “+" or " -“ to set the correct hour.
•
Press, “MODE” to confirm your setting.
•
The minute display starts to flash. Now use the “+" or " -“ to set the correct minute.
•
Press, “MODE” to confirm your setting.
Summary of Contents for TPW399
Page 46: ...10 ...
